TAT2 New Turntable from CS Port Audio

Arriving soon is a second generation the CS Port audio turntable, the TAT2.

This model incorporates the same fundamental design ideas of the LFT1 top of the range model in a one piece design. Price is £25’000 including the air pump. The linear tracking arm AFU1-2 is priced at £11’500

A conventional tone arm can be added in conjunction if required.

MODELTAT2

Turn Table Unit floating in the air

TAT2

Finally TAT2 appears with high stable and very quiet performance as the second line. By surely inheriting the flagship DNA, TAT2 creates rotation with much less fluctuation by the compact design and integrated unit. The granite base weight is 19kgs, The stainless platter is 17kgs and the stabilizer is 2kgs. In order to eliminate servo noise into the audio band, TAT2 is equipped with the open control motor. Also TAT2 is able to keep away from any kind of vibration and noise. It certainly can follows only the groove on vinyl.
TAT2_上面.png

Super heavyweight turntable

In order to suppress micro vibration from the floor,19 kgs granite turntable base is equipped.Also 17kgs stainless platter is lifted by air bearing and rotates very stably and quietly. The platter is only loaded by a few hundred grams in the lateral direction by the yarn belt to support the rotation.

TAT2_モーター.png

Non-servo motor drive

Noise of servo control motor may come into the audio band. TAT2 does not function with the rotation control. The open control motor just supports the high moment of inertia of the platter to eliminate micro vibration. In addition, the yarn drive does not transmit the vibration of the motor. This yarn Kevlar (four-net aramid fiber) that is has much less elongation and is harder to break than iron to drive the platter reliably.

TAT2_2アーム.png

2-arm installation available

The base plate specified for the customer’s arm is attached normally. Also it is available to mount the linear tracking arm AFU1-2 (sold separately). In addition, it is possible to mount the second arm and as expandability, up to 3 different arms can be installed. (Sold separately from ordering the second arm base)
POU1.png

Highly Silent air pump with double hermetic structure (sold separately)

The air pump(POU1) is equipped with the motor system for long-term stable function that is used in medical. POU1 supplies the compressed air without vibration and to lift up the heavy platter. It has a double hermetic structure that prevents vibration noise from leaking and keeps highly silent in your music room.
Specification
Model TAT2
Material

Base ……….. JIS0 grade granite table base

Platter ……. High inertia stainless steel platter
Weight

Base … 19kg

Platter ……. 17kg
Drive system Crystal-follow No feedback motor drive XFD method
Rotation transmission method Yarn drive (four-fiber aramid)
Drive motor DC coreless low noise motor
Rotation speed 33 1/3 ・ 45rpm
Speed accuracy ±0.3%
Wow and flutter

Wow 0.2% , Flutter 0.04% less
Power supply AC100 / 120 / 200 / 240V, 50 / 60Hz
Power consumption 40W
Size 440W x 128H x 320D
Accessories

AC power cable, 2 drive yarns, air tube Φ4,

One arm attachment (processed according to the arm specified by the customer)
Sold separately

Player board LPB2

Air pump POU1 (DC cable included)

Linear tracking arm AFU1-2 (air tube Φ4 included)
Warranty period 5 years (excluding consumables) registration is required

An optional air pump POU1 is required for use.
The specifications, design, design and price may be changed without notice.
Due to the use of granite, stone patterns and colors may vary depending on the production lot.
0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *