Description
The AMP 8
In order to take full advantage of the enormous sound quality of the DAC 8 DSD, an extremely good amplifier is required, which is uncompromisingly constructed and equipped. This is why the AMP 8 is based on the circuit and design technology of our HV and R-series amplifiers. The design is fully symmetrical and the output stages are equipped with high-performance ThermalTrakTM audio transistors. A cleverly programmed microprocessor monitors the AMP 8 and controls the protection circuit, which switches of the output relay in case of a short circuit, overheat and overload.
One must not be deceived by the small housing size, the AMP 8 can deliver due to its extremely stable power supply more than 100 watts of continuous output power in the highest quality. The slow-running cooling fan is silent, and is controlled by the microprocessor according to load and temperature. The AMP 8 sounds sensational: vigorous, dynamic, high-resolution yet delicate, subtle and audiophile. The combination of DAC 8 and AMP 8 sets new standards far beyond its price class.
Specifications
Output Stage
Nominal output per channel into 8 Ohms / 4 Ohms 80 Watts / 110 Watts
Peak output per channel into 8 Ohms / 4 Ohms 100 Watts / 130 Watts
Frequency response + 0 / – 3 dB 1 Hz – 200 kHz
Slew rate 60 V/µs
Damping factor > 170
Signal to noise ratio > 103 / 110 dB
Channel separation 81 / 65 dB
Total harmonic distortion < 0,009 %
Reservoir capacity 33.000 µF
Mains / Accessories / Dimensions
Mains 110-120 V or 220-240 V, 50-60 Hz. 400 Watts
Standby < 0,2 W
Additional features Trigger input +5 … 20V for external switching on
Automatic signal-controlled power on
Dimensions (H x W x D) 9,5 x 27 x 27 cm
Weight 7 kg
Finish Case black aluminium 42, cover silver aluminium 43
Technical modifications reserved